Outdoor Storage Box – Why So Much Interest..

Do-it-yourself wooden garden storage boxes are a simple way of storing seasonal and temporary items. Wooden storage boxes can be used within the garage, on the patio or in a storage shed to hide seasonal equipment, such as patio sets, pool equipment, bikes and machinery. While you can easily buy a storage box at a hardware store, building a wooden one at home is actually a cheaper alternative and the box can be personalised and custom-built to fit into any space.

Measure the space in which the Used A Nice Outdoor Storage Box will be placed, and take note of the figures for that height, width and depth you will need the box to get. Draw the pieces required for the 4 sides from the box on the plywood sheets, using a pencil. You will want two side pieces measuring height by depth, as well as the front and rear pieces should measure height by width. Eliminate the 4 pieces with all the saw. Use the sandpaper to create the sides and surfaces smooth and splinter-free.

Arrange among the side pieces so it is perpendicular for the front piece. Both pieces ought to be on end, and also the end of the side piece should be protected by the outer lining side from the front piece. Quite simply, the side pieces is going to be attached within the front and back piece ends.

Attach the two pieces utilizing the drill and at least four screws with the front piece. Attach the next side piece in the same way for the opposite end of the front piece. Ensure the second side piece’s end is inside the front piece. Last, attach the rear piece with the drill and screws, so both ends from the side pieces are included in this last piece. You need to now have a rectangular wooden frame.

Measure the rectangular frame’s perimeter. This may provide the measurements for your bottom and lid pieces. Write the measurements down. Transfer the measurements for the plywood, using a pencil. Make sure they’re square, then cut them out with the saw and sandpaper both pieces.

Attach the base piece by lining it up for the wooden frame. Place the level on the box to be sure the piece is level and even. Attach it with screws placed every 6 inches, drilling the screws with the bottom piece and into comfou four sides. When done, turn it over, so you possess an open box without having a lid.

Attach two hinges towards the lid piece, screwing those to the underside of one of the long sides. Flip the wooden garden storage box on its side to set up the lid properly. Line the lid up to the box so that the hinges are in the box and attach the hinges using screws as well as the screwdriver. Flip the wooden storage box right side up and close the lid.